Sparkles and Spikes Bangle

In my last post I teased a little...  I said that I'd made something similar but a little more bonkers...

Well here it is:

I call it Sparkles and Spikes and it just makes me laugh every time I look at it because it was such an unbelievable joy to bead! Horns, wings, rivolis suspended in mid-air? Yeah baby, it's got it all!   It's a bit of a bugger to photograph though!

As you can see, I kept the pallette pretty simple, using only silver lined crystal and silver lined smoke delicas to complement the Swarovski rivolis in black diamond.

Starting with a simple MRAW band of 84 units, I increased the plain silver mid section into horns with enough space between them for the rivolis to sit quite happily between them.  Then I turned my attention to the smoky wings and increased them just enough so that , using one of the beads in the bezel as the tip of the wing both top and bottom, the rivoli would hang there, away from the bangle.  I wanted them to be close to the tips of the horns but not quite as far out - mainly to give them a bit of protection but also so that the horns attack first!  Surprisingly, the wings are exactly half the number of rows as the horns, even though they look so very much shorter to me.

The inside of the bangle is nice and smooth on the inside.  It's pretty stiff and solid but squishes down just enough to get it over the hand - phew!

I do hope you like it and that it makes you laugh as much as me!

It is available in my Etsy shop here.

Golden Chocolate Rick Rack Bracelet

Oh my goodness it's been a while!  I didn't quite realise just how long it had been though!  Ooops...

Anyways, I have been incredibly busy with my needle, thread, beads and a smattering of Swarovski rivolis and am pleased to show you my latest bracelet:

As you can see, I used Jean Power's amazing Rick Rack pattern, started off by using the incredible Contemporary Geometric Beadwork MRAW start.  As this isn't the first Rick Rack bracelet I've done, I also made the Double Layer Rick Rack bracelet last year, I noticed that those delicious v shapes could be perfectly filled using Swarovski pear shaped crystals.  This got me thinking....

I used MRAW to bezel the Swarovski crystals (I used 18x13mm Pear Fancy Stones in Golden Shadow), which was surprisingly easy on the hands.  The stones didn't pop out or misbehave in any way whist I was beading - highly recommend using this method of bezelling!

I used delicas in Dark Bronze Matte and Galvanised Light Champagne Duracoat for the front.  I used the champagne for the ladders in the MRAW on the stones so decided to echo that in the main bracelet as well and then do a zigzag stripe of the gold to really draw those crystals into the design as a whole.

As you can see in this shot, the bracelet is double layered.  It could work single layered but I think that because I decided to use the bigger crystals, the body needed to be much more sturdy than a single layer.  I'm a tight beader and even one layer of rick rack is pretty strong but I really didn't want this bad boy to buckle over time with lots of wear! The reverse of the bracelet is just plain matte dark bronze as there was no need for there to be any ornamentation as it generally won't be seen.

It was finished with a simple gold slide clasp, the loops of which were securely attached and hidden inside the bracelet to give it a fully finished and sleek look.  

I must admit that I'm really proud of how well this bracelet turned out.  It sits really closely to the wrist (well, mine anyway!) and looks quite chic and elegant - not my usual style at all! It is exactly what I imagined when I first put needle and thread to beads - that never happens! I hope you like it too.

It is available in my etsy shop here.

I've also finished another bangle that's along these lines but a teeny touch more bonkers - I'll blog it soon!

Tangle Of Angles Bangle

Whilst I was off work, apart from the Raven Star Bangle, I also started another bangle. I decided to go way out of my comfort zone and make something out of colours that I personally never wear, silver lined bronze and gold lined cream.

 I call it the Tangle Of Angles Bangle because as I was making it, I decided to really push myself on the number of horns and gave it 14!  The most I'd ever done before that was 12 and my goodness it was such a tangle to bead!  The beadwork decided to be such a tangle that it was an absolute horror to bead and took about four decreasing rounds (and an obliging can!) for it to become round and bangle shaped.

 I also decided to add in an Elegant Guide Round (video) that Kate McKinnon came up with, which I hadn't played with before.  Even though I didn't embellish the EGR in any way, I am a definite convert to this technique and will never stitch in the ditch again!

 After I did one side with the EGR, I just suddenly lost interest.  My stitches had reopened and I just couldn't face doing any more beading for a few weeks so my amazing Mummy finished it off for me. 

 I think that going with the zigzag edges really completes the piece.  I always tend to go with straight edges or wings but I wanted to try something a little more elegant this time, lending itself to the colours (get me trying to do grown up beading!).

It is available in my Etsy Shop

Rainbow's Revenge Bangle

Yesterday, I finished the Rainbow Reverie Bangle, today I finished a bangle in the same colours but with a much more vicious look which I have called Rainbow's Revenge.

As I was beading up the Rainbow Reverie, I had an idea to put something in the ellipses between the wing joins.  I had hoped to put in some dyed howlite skulls but unfortunately I got my basic band size wrong so that had to go back into the thought processes for a little more stewing and I went back to my bead stash and found that the skulls had come with some absolutely fantastic dyed howlite claw spikes.

I just thought, hey, why not?! and started adding them.  Blooming tricky though - the more spikes I added, the more the thread caught on them!

 I love that the inside edge is the same as the Rainbow Reverie but the whole look has changed by the addition of those funky spikes!

 From the top you can see that the bangle is actually quite slender - the spikes are what give the bangle depth and punch.

I know it won't be to many people's tastes, it is pretty outrageous, and quite heavy, but I love it!  I love that it is bonkers and that the person who ends up owning it will never be able to type wearing it - or do much of anything practical!  It's a statement and it is totally unapologetic and that's what I like about it so much.  It is what it is and doesn't make any bones about it!

It is available to buy in my Etsy Shop

Rainbow Reverie Bangle

So I decided to make something with a little bit of colour.  As you know, I'm not good with colour at all and tend to steer clear, but I just wanted to really go for it, like I did with the Jester Cuff.  I didn't want to emulate it, more create a sibling for it and this is what I came up with:

 Originally I wanted to nestle dyed howlite skulls in each of the ellipses but I made the wings too long and the bellyband too thick for it to work.  I still have the beads on my tray though so...

I love how the view from the top looks so utterly simple and undulates so smoothly.
 

 And it was my first foray into using the luminous delicas.  They're a bit fab and very bright (you can't tell in this picture how bright that pink is, you'll just have to trust me!).

 Each wing tip is joined and the whole structure is extraordinarily solid. 

I hope you like it.

Available in my Etsy shop here.

Raven Star Bangle

My most recent make is a bangle that has been more therapeutic than anything I have ever made before.  As I have previously mentioned, I went into hospital to have a lump removed from my breast.  Unfortunately the wound got infected and my stitches burst, which has been rather difficult.  Luckily I have had the most amazing support from my family and my other half, they have been so superbly strong and marvellous.  All is good now, I'm just healing slowly.

I decided to take advantage of the recuperation time spent off work to make a study in form, eschewing colour and concentrating solely on what I could make the delicas do. 

Rather than make a usual start of an MRAW length that would be the smallest part of the bangle, I decided to push myself and made a zigged MRAW chain that would become both the tips of the horns and the very inside of the wings where the spines were 2mm cubes:

As I decided to do the whole bangle in gunmetal (simply because I had the most beads in that colour), each zig and zag was marked with a tie of white Nymo so that I didn't lose myself when adding in the next row.  It was huge - 174 MRAW units!

Slowly I added rows and rows of gunmetal delicas and it started to change its form, almost looking like a Zig Wing by Kate McKinnon.  Then I turned my attention to the other side and it slowly started to open up, like a flower:

The more rows I added, the more the form became apparent.  It was working!

As it opened and both sides began to have the same number of rows, it really started to lie flat and become, not what I had imagined but what it needed to be.

It is certainly big and takes no prisoners!  I can't imagine that there will be many that actually like it but that is okay, good even.  This bangle is a symbol of strength, and whoever does decide that they like it and wants it then I hope they feel as fierce and as strong as I felt when I was making it.

It is available in my Etsy shop here

EDIT: I just received the most wonderful screenshot from Kate McKinnon - it is being included in Contemporary Geometric Beadwork Volume II and I have contributed the pattern to the Pattern Library so you can make your very own!  I'm so excited!

Vicious Business

I finally finished something!  This is a new bangle based on Contemporary Geometric Beadwork techniques that I call Vicious Business.  It is an evolution of the Pink Pinstripe Ruffle Cuff that I made a couple of years ago.  My lovely friend Johnti Greybeard saw it and said that it would look awesome if the wings joined around horns like the Red Many Horn.  That idea has been slowly cooking in the back of my mind, stewing, forming and reforming until I finally got round to putting needle and thread to beads and this is what happened:

 

I used my favourite red delicas ever - Opaque Cranberry - for the horns and Black Opaque wings with Gunmetal pinstripes (to pay homage to it's originator).

The horns are (small for me) 15 rows high and the wings join at the centre point so they frame the horns in pretty ovals, softening the look - but only a smidgen.

Etsy Shop

So I decided that it was high time I got with the rest of the world and set up a little Etsy shop to sell all the beadwork Mummy and I have made over the years (that we think is good enough to sell, obviously!). 



A few years ago I became disillusioned with craft fairs and utterly fed up with the amount of theft that goes on at many of them.  I've lost so much jewellery that we've spent months on that I just stopped doing them.

We are aiming to graph out patterns eventually but this time spent off work (recuperating from a small operation to remove a lump from my breast - get those boobies checked people!) is best spent setting the shop up and then patterning can come later.

I've not finished listing everything yet though, my photography skills are severely lacking - as you well know from seeing my blog here!

Feedback would be awesome :)

A necklace for Megan

Over Easter, Xander and I went down to South Wales with my other half, Chris, so that I could meet his family.  Whilst we were down there we had an absolutely lovely time.  We visited Swansea and Llanelli and went to have chips on the beach at Mumbles.  It was glorious.

Chris' sister and her husband have three rather beautiful children, one of whom asked me if I would make her a necklace.  She and her Mum had a look through my blog and my Facebook and she really liked the Ombre Cabouchon Necklace that I made a few months back.  She told me that her favourite colour is blue so I knew exactly which stone to use, because what 7 year old girl doesn't like sparkly blue goldstone?!

A simple twisted herringbone rope with silver lined clear and blue iris delicas was the perfect foil - made big enough that she'll be able to wear it when fully grown as well as now. I decided to go against making one of my usual clasps in favour of using a silver magnetic clasp, just in case she got caught on something though.  In the end, I really liked it and didn't think it a design compromise at all!

I posted it to her as soon as I made it and got a lovely telephone call to say thank you and a really pretty picture of her wearing it, which was a real treat. 

Mummy's Shape Up Bracelet

Mummy has been at it again...  She has been playing with Tila Beads and decided to see if she could use them as the MRAW start to make all sorts of chunky different shapes.  Once she'd made a handful she decided to sew them all together and voila, a gorgeous Shape Up bracelet!

The bracelet below is the original gold and gunmetal design that she used.  Not colours I'd ever put together but my goodness it works!

Here you can see all the shapes laid out and how deftly put together they are.  This bracelet is delicate but chunky.  It doesn't slide, just sits close to the wrist and the look totally depends upon which of the elements you have showing. It's a very comfortable bracelet and doesn't interfere with anything you're doing. 

Then the cheeky minx that is Mummy decided to have a rummage through my opaques because she decided that where the gold and gunmetal was elegant and grown up, bright keleidoscopic colours would turn the same bracelet into something entirely different! And doesn't it just?!  It's playful and fun and I love this so much more than the gold one above.  It's reminiscent of Liquorice Allsorts (yummy!) and that makes me think of happy summer days playing in the garden when I was little.

In this final picture below you can see how Mummy has used a dressmaker's popper for the closure.  A simple little tab for one half and the other half sewn to a baby square.  So lovely and so seamless when on. 

Mummy's Crystal Triangle Earrings

Once again, Mummy is the creator behind the pieces in this post (I really need to get more beading time in!).

Inspired by the most marvellous Jean Power and the triangles she is famous for, Mummy decided that she wanted to see if she could use the triangles as a bezel in which to hide some delicious little Swarovski rivolis.  Of course, she couldn't stop at the making of one pair of earrings, so made three!

How sweet are these gorgeous little earrings?!  Unfortunately, the light was rubbish (blooming England in Winter) so you can't get the full delight that these earrings are.  The back side is a simple triangle and then decreased around the front, using 3mm rounds at each point, which helps stop the rivoli wriggling about in it's triangular cocoon, and then sparklied up with a picot edge in 15s.  I love this set in gunmetal and steel with the smoky grey rivoli.  Very me!

Isn't it strange how a different colour can change the whole look of a piece?!  The exact same pattern as above, just with shades of pink yet they look so delicate and girly and definitely not something that I'd wear (sorry Mummy!).

And then again, with black and dark red.   These look quite gothy compared with the more industrial gunmetals and the girly pinks.  I love them!

 like how the rivoli is completely encapsulated at the back, reducing the risk of the point being knocked off and ruining the whole earring. Also, how different these earrings look just with a change of colour.  It always astonishes me that colour plays such a huge part in the whole feel of a piece, even something as small as a pair of earrings.  I shouldn't be so surprised but because I'm rubbish and generally have my go to colours, I always am!  If Mummy had just shown me the pink set, I would have been impressed with the construction, but never in a million years thought they were my bag, yet the exact same earring in the gunmetal and steel may simply have to find their way into my jewellery box!

RAW Heart

Mummy's proper on one with creating new patterns!  After the stars and seeing the Sweet Hearts that Sabine Lippert made, Mummy decided that she could shift the techniques that she learnt on using the sizes of the beads to for the shapes onto cubic RAW.

Off she set, with a simple desire to make a heart.  Rather than using sizes, she decided to continue with the way she was going on the stars and used numbers of beads instead and this is what she came up with:

Isn't it the loveliest and most deceptively simple looking thing you've ever seen?!  On the side like this you can see the inner CRAW construction and the fact that she went with matte bronze along the inner side of the heart and shiny bronze along the outer edge, a perfect complement to the silver lined emerald.

The heart was simply hung on a silver chain using a jump ring through one of the units.

Pretty work Mummy